Bathtub Repair ny

Tuesday, November 19, 2013

Things to follow when considering resurfacing your bathtub

If you have an old bathtub that looks ugly, you should try bathtub resurfacing. This is the best alternative to buying a new bath and paying for its installation. Resurfacing is a technique, which was developed due to the high cost, and inconvenience of replacing a bathtub.

Bath tub resurfacing is process that makes your old bathtub look like new one. There are several advantages of resurfacing, of which the biggest is the cost. Save thousands of dollars as opposed to the price of replacement. Secondly is the short downtime. The process takes about 3-4 hours and you are left without any mess in the bathroom. The bathtub can be used the very next day itself.

But while considering resurfacing your bathtub you should avoid certain things that may be costly mistakes.

The things to know when considering resurfacing your bathtub

1. Do not try it yourself though you have the option to do it yourself. It is better to hire professional bath tub resurface еxреrtѕ to get the job done. This is because reading the manual and doing the job yourself may end up with poor quality of work and damages your bath tub. It is better to leave the job for experts to save your time and money.

2. Check out whether the service provider you are hiring is providing any guaranty on the work they do. Some of them provide money back guarantee on their work.

3. Dеtеrmіnе thе сrеdеntіаlѕ thаt thе рrоfеѕѕіоnаlѕ hold. Try to find out ѕоmеbоdу in your locality that саn be trusted to do your job.

4. Check out thе type of рrоduсtѕ they use to do the job. Check out whether the products they use are certified and branded. Otherwise they may cause hazardous skin infections.

5. Establish a contract with the service provider. Make sure that the professionals you are hiring deliver thе bеѕt роѕѕіblе rеѕultѕ to уоu.

Bathtub refinishing services in Westchester NY

Perma Ceram¹ of Westchester, Cortlandt Manor, NY offers the entire bathtub refinishing services in Westchester at a fraction of the cost of other alternatives, and in little as one day without any mess. They also provide services like tile repairing, tile regrouting and tile resurfacing. above things into consideration before planning to resurface your bathroom.

1. Perma Ceram: Perma Ceram of Westchester, Cortlandt Manor, NY is serving Westchester since 1978. They provide refinishing services as well as regrouting and tile repairs. Call at (914) 930-4964 or (888) 797-8108 or you can send mails at info@permaceramwestchester.com. Office is located at 72 Gallows Hill Road, Cortlandt Manor, NY 10567. For more information, visit website www.permaceramwestchester.com

Things to follow when considering resurfacing your bathtub

But while considering resurfacing your bathtub you should avoid certain things that may be costly mistakes.

The things to know when considering resurfacing your bathtub

2. Check out whether the service provider you are hiring is providing any guaranty on the work they do. Some of them provide money back guarantee on their work.

3. Dеtеrmіnе thе сrеdеntіаlѕ thаt thе рrоfеѕѕіоnаlѕ hold. Try to find out ѕоmеbоdу in your locality that саn be trusted to do your job.

4. Check out thе type of рrоduсtѕ they use to do the job. Check out whether the products they use are certified and branded. Otherwise they may cause hazardous skin infections.

5. Establish a contract with the service provider. Make sure that the professionals you are hiring deliver thе bеѕt роѕѕіblе rеѕultѕ to уоu.

Bathtub refinishing services in Westchester NY

Things to follow when considering resurfacing your bathtub

But while considering resurfacing your bathtub you should avoid certain things that may be costly mistakes.

The things to know when considering resurfacing your bathtub

2. Check out whether the service provider you are hiring is providing any guaranty on the work they do. Some of them provide money back guarantee on their work.

3. Dеtеrmіnе thе сrеdеntіаlѕ thаt thе рrоfеѕѕіоnаlѕ hold. Try to find out ѕоmеbоdу in your locality that саn be trusted to do your job.

4. Check out thе type of рrоduсtѕ they use to do the job. Check out whether the products they use are certified and branded. Otherwise they may cause hazardous skin infections.

5. Establish a contract with the service provider. Make sure that the professionals you are hiring deliver thе bеѕt роѕѕіblе rеѕultѕ to уоu.

Bathtub refinishing services in Westchester NY

Monday, November 11, 2013

Tile Re-grouting Process

Nothing shows the age of a home more than discolored, neglected grout. Tile re-grouting is the process used to make your bathroom or kitchen look like a brand new one.

Old tiles often have cracked and discolored grout. You can see this problem commonly in tiled surfaces of bathroom, especially in the shower area. You should not ignore this cracked and damaged grout.

Process of tile re grouting

1. Clean the existing grout properly

Before starting the process of tile regrouting, all the existing grout should be cleaned properly. After cleaning the damaged grout, if the tiles look fine then the entire regrouting process can be skipped until the same is much damaged. Use best grout cleaners to clean the grout, so that no remaining is left behind.

2. Prepare the surface

Prepare the surface to start tile regrouting. Vacuum the area and make sure that no chunks of grout are left behind.

3. Choose the appropriate grout color

Choose grout of desired color that matches your tiles. Grout is available in dry or pre-mixed form. With help of a grout float make the grout mixture ready for application. A grout float helps you spread grout evenly on the entire tiled area. Grout float ensures that no crack or gaps are left while applying grout between tiles.

4. Apply the grout between the gaps:

Spread the grout over the tile using the tool at an angle of 30 degrees to the surface. Press the grout properly inside the cracks and gaps. Leave it for about 20 minutes.

5. Clean the Surface

Clean the re grouted area with a wet sponge to remove any remaining left behind. Once this is done leave the grout to dry for about 20 minutes.

Tile Regrouting services in Westchester

Perma Ceram¹ of Westchester, NY offers tile regrouting services at very affordable prices. They will come, dig out the existing grout, and replace it with new fresh fortified grout of your color choice, and buff it down. They also provide services like tile repairing and tile resurfacing. You can call them at (914) 930-4964 or (888) 797-8108 if you need any services.

Friday, November 8, 2013

How to Re-Grout Your Tile

Re Grouting is a smart way to save your money. If you don’t take proper care of your tiles, you may end up with a huge damage. The process of re-grouting can be completed in a small amount of time. This work can potentially save you thousands in repairs, and gives a fresh new look to almost any bathroom. The author in this article explains about the re-grouting process.

Re Grouting is a smart way to save your money. If you don’t take proper care of your tiles, you may end up with a huge damage.

A senior executive from Perma Ceram¹ of Westchester says about tile re-grouting, “Nothing shows the age of a home more than discolored, neglected grout. Tile grout is the material which is used to seal the gaps between your wall tile, and this is one of the most neglected areas of the bathroom, particularly in shower areas. Over time, the grout will get moldy, yellowed, discolored, or begin to come out. This is an indication of the grout needing to be replaced. Over time your grout will get porous and eventually water will penetrate the grout and seep into the wall causing a potentially dangerous situation. If left for a long enough period of time, this water seepage can attract insects and eventually catastrophic wall damage causing your tile to fall or even worse.” (Ref: Perma Ceram of Westchester, http://permaceramwestchester.com/services/re_grouting)

The process of re-grouting can be completed in a small amount of time. This work can potentially save you thousands in repairs, and gives a fresh new look to almost any bathroom.

The processes of Re-Grouting are as follows:

Step1: Decide what type of grout you will be using - sanded or non-sanded. This depends on the size of your grout's joint. If your grout joints are larger than 1/8 inch (.3175 cm) use sanded grout to fill in the space; if your joints are less than 1/8 inch (.3175 cm) use non sanded grout to fill in your joints as it is more compact.

Step 2: Clean the space really well and remove existing grout. This will prevent mold contamination.

Step 3: Apply a tile sealant over the surface of your tiles if they have become porous so the grout does not sink underneath the surface when regrouting your tile. You can do this by using a tile sponge, a roller, or simply wipe the tiles with a coat of sealant and allow to dry for 24 hours.

Step 4: Mix up your grout as the manufacturer recommends. Apply a generous amount of grout to your grout joints with a grout trowel using circular motions. Be sure to distribute extra grout into the grout joints in order to fill them completely. Grout all areas of your tile floor except the expansion joints; these are the areas between the floor tile and bathtub, wall, door, and cabinet or sink area. Let grout set for approximately 10 minutes. While the grout is setting, fill your second 5 gallon (19 L) bucket with water and grab your tile sponge in order to clean the tile floor.

Step 5: Then, using a very small amount of water and a sponge, keep cleaning off the surface of the tiles you've regrouted. Wipe all grout residues off of the tile using the damp tile sponge in a diagonal motion. Rinse and repeat. Rinse tile sponge and repeat the previous step until the entire grout residue is removed and tile is completely clean of grout haze.

Step 6: Allow grout to cure for 24 to 48 hours before stepping on it to ensure its stability and that it is completely dry. Caulk the expansion joints using a caulk color that matches your grout. Completely fill these expansion joints then smooth and concave using your finger.

Step 7: Once the grout has completely cured, apply a penetrating sealer using either a sponge or spray bottle to the grout joints. Wipe off excess sealer from the tile immediately as it will stain the tile.

Friday, October 18, 2013

Bathroom Tiles Resurfacing

Ceramic shower tiles may be damaged or broken over a period of years. This may include damage to the grout joints, or even individual tiles may crack, causing water to leak into the walls or floor space. The article gives idea about how professionals repair them to produce long lasting results.

If your ceramic tiles have some missing pieces you should replace them. When the tiles are chipped, you should get them repaired. Repairing or replacing the tile in bathrooms is complex. Hiring an expert to repair bathroom tile is good idea and also work done by expert’s produces long lasting results.

Assess the damage

The experts first assesses the damage. If there are only a few cracked, loose or missing pieces of tiles, a simple replacement job will sufficient. If the damage is minimal, painting the cracks in the tile with matching paint will be simpler than replacing the tiles. If the damage is too large to conceal with paint then the bathroom tiles will need to be replaced.

Tile repair process

For cracked tiles:

First tiles are cleaned using a household cleanser. Special ceramic glue is placed onto the cracked areas. The glue is left to dry for about 24 hours.
Using sandpaper, the dried glue is sanded until a completely flat area is obtained. In the end the dust is wiped out. The tiles should be totally clean before painting.

Later paint is placed over the damaged tile. The paint should dry for a day. The next step is to apply polyurethane as soon as the paint is dry. The polyurethane should dry for at least 8 hours.

Again sandpaper is applied for the dry polyurethane. Two more layers of polyurethane is applied. You must avoid walking on the tile for 24 hours.

Replacing the Damaged Tiles

The big job is getting the ceramic off the wall. Professional use grout saw to cut out the grout. Then, with a hammer and a chisel, the tiles are softly separated from the wall. Once that's done, the wall is sanded until smooth. Then the tile is set up using grout.

All this work is to be done by the professional for safety and long lasting results.

Bathtubs & Tile Resurfacing NY

Perma Ceram of Westchester¹, Cortlandt Manor, NY offers the entire bathtub refinishing services in Westchester at a fraction of the cost of other alternatives, and in little as one day without any mess. They also provide services like tile repairing, tile regrouting and tile resurfacing. For information, visit www.permaceramwestchester.com

Bathtub refinishing done by professional produce long lasting results

If you've made the decision to update your bathroom, and have chosen bathtub resurfacing over replacement, you are now left with two options: hire a professional, or, attempt to take on task yourself. But for this type of job, many benefits will come with hiring a professional who is experienced in bathtub refinishing.

Benefits of hiring a professional for your bathtub & tile resurface

1. Although there is no or plumbing involved, there are strong chemicals used to strip the tub. This can create mess, and release many dangerous fumes. Professionals trained in bathtub and tile resurfacing is equipped to handle necessary ventilation process and have tools to help with quick drying of the chemicals.

2. A good bathtub refinishing contractor will take the time to properly prepare your bathtub's surface based on years of experience in what works best depending on the material that your bathtub is made of.

3. Contractors have access to certain products that are not necessarily available for those who do repairs individually.

4. Professionals will be able to have a variety of colors to choose from to match your current color.

5. Hiring a contractor will ensure that the best way of restoring the natural beauty of your bathtub is used. A professional bath resurfacing company will usually stand behind their products 100%, so they want to give you best, long-lasting results that they can.

6. Doing this yourself can take 5-8 days, and if you end up with poor results, you have to hire a professional again.
7. A professional bath resurfacing company will usually stand behind their products 100%, so they want to give you best, long-lasting results that they can.

Bathtub Repair NY