Bathtub Repair ny: November 2013

Tuesday, November 19, 2013

Things to follow when considering resurfacing your bathtub

If you have an old bathtub that looks ugly, you should try bathtub resurfacing. This is the best alternative to buying a new bath and paying for its installation. Resurfacing is a technique, which was developed due to the high cost, and inconvenience of replacing a bathtub.

Bath tub resurfacing is process that makes your old bathtub look like new one. There are several advantages of resurfacing, of which the biggest is the cost. Save thousands of dollars as opposed to the price of replacement. Secondly is the short downtime. The process takes about 3-4 hours and you are left without any mess in the bathroom. The bathtub can be used the very next day itself.

But while considering resurfacing your bathtub you should avoid certain things that may be costly mistakes.

The things to know when considering resurfacing your bathtub

1. Do not try it yourself though you have the option to do it yourself. It is better to hire professional bath tub resurface еxреrtѕ to get the job done. This is because reading the manual and doing the job yourself may end up with poor quality of work and damages your bath tub. It is better to leave the job for experts to save your time and money.

2. Check out whether the service provider you are hiring is providing any guaranty on the work they do. Some of them provide money back guarantee on their work.

3. Dеtеrmіnе thе сrеdеntіаlѕ thаt thе рrоfеѕѕіоnаlѕ hold. Try to find out ѕоmеbоdу in your locality that саn be trusted to do your job.

4. Check out thе type of рrоduсtѕ they use to do the job. Check out whether the products they use are certified and branded. Otherwise they may cause hazardous skin infections.

5. Establish a contract with the service provider. Make sure that the professionals you are hiring deliver thе bеѕt роѕѕіblе rеѕultѕ to уоu.

Bathtub refinishing services in Westchester NY

Perma Ceram¹ of Westchester, Cortlandt Manor, NY offers the entire bathtub refinishing services in Westchester at a fraction of the cost of other alternatives, and in little as one day without any mess. They also provide services like tile repairing, tile regrouting and tile resurfacing. above things into consideration before planning to resurface your bathroom.

1. Perma Ceram: Perma Ceram of Westchester, Cortlandt Manor, NY is serving Westchester since 1978. They provide refinishing services as well as regrouting and tile repairs. Call at (914) 930-4964 or (888) 797-8108 or you can send mails at info@permaceramwestchester.com. Office is located at 72 Gallows Hill Road, Cortlandt Manor, NY 10567. For more information, visit website www.permaceramwestchester.com

Things to follow when considering resurfacing your bathtub

But while considering resurfacing your bathtub you should avoid certain things that may be costly mistakes.

The things to know when considering resurfacing your bathtub

2. Check out whether the service provider you are hiring is providing any guaranty on the work they do. Some of them provide money back guarantee on their work.

3. Dеtеrmіnе thе сrеdеntіаlѕ thаt thе рrоfеѕѕіоnаlѕ hold. Try to find out ѕоmеbоdу in your locality that саn be trusted to do your job.

4. Check out thе type of рrоduсtѕ they use to do the job. Check out whether the products they use are certified and branded. Otherwise they may cause hazardous skin infections.

5. Establish a contract with the service provider. Make sure that the professionals you are hiring deliver thе bеѕt роѕѕіblе rеѕultѕ to уоu.

Bathtub refinishing services in Westchester NY

Things to follow when considering resurfacing your bathtub

But while considering resurfacing your bathtub you should avoid certain things that may be costly mistakes.

The things to know when considering resurfacing your bathtub

2. Check out whether the service provider you are hiring is providing any guaranty on the work they do. Some of them provide money back guarantee on their work.

3. Dеtеrmіnе thе сrеdеntіаlѕ thаt thе рrоfеѕѕіоnаlѕ hold. Try to find out ѕоmеbоdу in your locality that саn be trusted to do your job.

4. Check out thе type of рrоduсtѕ they use to do the job. Check out whether the products they use are certified and branded. Otherwise they may cause hazardous skin infections.

5. Establish a contract with the service provider. Make sure that the professionals you are hiring deliver thе bеѕt роѕѕіblе rеѕultѕ to уоu.

Bathtub refinishing services in Westchester NY

Monday, November 11, 2013

Tile Re-grouting Process

Nothing shows the age of a home more than discolored, neglected grout. Tile re-grouting is the process used to make your bathroom or kitchen look like a brand new one.

Old tiles often have cracked and discolored grout. You can see this problem commonly in tiled surfaces of bathroom, especially in the shower area. You should not ignore this cracked and damaged grout.

Process of tile re grouting

1. Clean the existing grout properly

Before starting the process of tile regrouting, all the existing grout should be cleaned properly. After cleaning the damaged grout, if the tiles look fine then the entire regrouting process can be skipped until the same is much damaged. Use best grout cleaners to clean the grout, so that no remaining is left behind.

2. Prepare the surface

Prepare the surface to start tile regrouting. Vacuum the area and make sure that no chunks of grout are left behind.

3. Choose the appropriate grout color

Choose grout of desired color that matches your tiles. Grout is available in dry or pre-mixed form. With help of a grout float make the grout mixture ready for application. A grout float helps you spread grout evenly on the entire tiled area. Grout float ensures that no crack or gaps are left while applying grout between tiles.

4. Apply the grout between the gaps:

Spread the grout over the tile using the tool at an angle of 30 degrees to the surface. Press the grout properly inside the cracks and gaps. Leave it for about 20 minutes.

5. Clean the Surface

Clean the re grouted area with a wet sponge to remove any remaining left behind. Once this is done leave the grout to dry for about 20 minutes.

Tile Regrouting services in Westchester

Perma Ceram¹ of Westchester, NY offers tile regrouting services at very affordable prices. They will come, dig out the existing grout, and replace it with new fresh fortified grout of your color choice, and buff it down. They also provide services like tile repairing and tile resurfacing. You can call them at (914) 930-4964 or (888) 797-8108 if you need any services.

Friday, November 8, 2013

How to Re-Grout Your Tile

Re Grouting is a smart way to save your money. If you don’t take proper care of your tiles, you may end up with a huge damage. The process of re-grouting can be completed in a small amount of time. This work can potentially save you thousands in repairs, and gives a fresh new look to almost any bathroom. The author in this article explains about the re-grouting process.

Re Grouting is a smart way to save your money. If you don’t take proper care of your tiles, you may end up with a huge damage.

A senior executive from Perma Ceram¹ of Westchester says about tile re-grouting, “Nothing shows the age of a home more than discolored, neglected grout. Tile grout is the material which is used to seal the gaps between your wall tile, and this is one of the most neglected areas of the bathroom, particularly in shower areas. Over time, the grout will get moldy, yellowed, discolored, or begin to come out. This is an indication of the grout needing to be replaced. Over time your grout will get porous and eventually water will penetrate the grout and seep into the wall causing a potentially dangerous situation. If left for a long enough period of time, this water seepage can attract insects and eventually catastrophic wall damage causing your tile to fall or even worse.” (Ref: Perma Ceram of Westchester, http://permaceramwestchester.com/services/re_grouting)

The process of re-grouting can be completed in a small amount of time. This work can potentially save you thousands in repairs, and gives a fresh new look to almost any bathroom.

The processes of Re-Grouting are as follows:

Step1: Decide what type of grout you will be using - sanded or non-sanded. This depends on the size of your grout's joint. If your grout joints are larger than 1/8 inch (.3175 cm) use sanded grout to fill in the space; if your joints are less than 1/8 inch (.3175 cm) use non sanded grout to fill in your joints as it is more compact.

Step 2: Clean the space really well and remove existing grout. This will prevent mold contamination.

Step 3: Apply a tile sealant over the surface of your tiles if they have become porous so the grout does not sink underneath the surface when regrouting your tile. You can do this by using a tile sponge, a roller, or simply wipe the tiles with a coat of sealant and allow to dry for 24 hours.

Step 4: Mix up your grout as the manufacturer recommends. Apply a generous amount of grout to your grout joints with a grout trowel using circular motions. Be sure to distribute extra grout into the grout joints in order to fill them completely. Grout all areas of your tile floor except the expansion joints; these are the areas between the floor tile and bathtub, wall, door, and cabinet or sink area. Let grout set for approximately 10 minutes. While the grout is setting, fill your second 5 gallon (19 L) bucket with water and grab your tile sponge in order to clean the tile floor.

Step 5: Then, using a very small amount of water and a sponge, keep cleaning off the surface of the tiles you've regrouted. Wipe all grout residues off of the tile using the damp tile sponge in a diagonal motion. Rinse and repeat. Rinse tile sponge and repeat the previous step until the entire grout residue is removed and tile is completely clean of grout haze.

Step 6: Allow grout to cure for 24 to 48 hours before stepping on it to ensure its stability and that it is completely dry. Caulk the expansion joints using a caulk color that matches your grout. Completely fill these expansion joints then smooth and concave using your finger.

Step 7: Once the grout has completely cured, apply a penetrating sealer using either a sponge or spray bottle to the grout joints. Wipe off excess sealer from the tile immediately as it will stain the tile.