Bathtub Repair ny: 2013

Friday, December 20, 2013

Why choose bathtub refinishing over bathtub replacement?

If your bathtub is worn out or looking outdated, then you may be worried about time, mess, and high cost of full replacement. Rather than replacing a tub or shower during a bathroom renovation, consider having it refinished. A look at the results, cost, and convenience of a bathtub refinish.

Hire bathtub refinishing experts to do the job for you to produce long lasting results rather than doing it yourself. They perform the job in a matter of hours. Their services include refinishing simple bathtub, sink, shower stall, wall tiles, vanities, kitchen countertops etc. Through the efforts of modern science and technology, they will eliminate stained, worn and chipped fixtures and bring them back to new condition in just hours.

Bathtub refinishing is chosen over its replacement for the following reasons

Cost of bathtub refinishing vs bathtub replacement:

The costs of replacing a built-in tub or shower will be 10-15 times more than the refinishing cost. This is because it includes the labor and cost of tearing out the old unit, removing and replacing tiles and wall board, re-doing plumbing hookups, and so on.

On the other side the refinishing work needs only few hundred dollars, but the results can long up to 5 years if the job is done by professionals.

Time needed for bathtub replacement

It takes several days, sometimes even weeks to complete bathtub replacement and it may not be ready to use for several days even after the work is completed.

Bath tub refinishing is a process that takes 2-3 hours to complete and the tub can be used the very next day.

Additional Benefits of Bathtub Refinishing

With bath refinishing you can retain the original color or change the color of your tub according to your wish. The work done by professionals is guaranteed for five years against certain defects such as peeling, blistering, or discoloration, but it will probably last longer than five years and can look every bit as good as a new tub or shower.

Bathtub refinishing Westchester NY company

Perma Ceram¹ of Westchester, Cortlandt Manor, NY is a Bathtubs & Tile Resurfacing company which offers the entire bathtub refinishing services at a fraction of the cost of other alternatives, and in little as one day without any mess. They also offer services like: Re-grouting, Re-Tiling, and Tile Repairs, Fiberglass and Porcelain Chip Repairs etc. For more details visit: http://www.permaceramwestchester.com/.

1. Perma Ceram: Perma Ceram of Westchester, Cortlandt Manor, NY is serving Westchester since 1978. They provide refinishing services as well as regrouting and tile repairs. Call at (914) 930-4964 or (888) 797-8108 or you can send mails at info@permaceramwestchester.com. Office is located at 72 Gallows Hill Road, Cortlandt Manor, NY 10567. For more information, visit website www.permaceramwestchester.com

Monday, December 9, 2013

Refinishing your old bathroom saves your time & money

Replacing old bathtubs sinks and tiles can be expensive. But, you don't have to live with old or ugly fixtures any longer, Bath room refinishing will to the job at very low price. If the surfaces are made of porcelain, ceramic tile, fiberglass, acrylic, you can now update your bathroom and save time and money.

One of the resurfacing experts from Perma Ceram¹ of Westchester tells-“There are several advantages to resurfacing, of which the biggest is the cost. Save thousands of dollars as opposed to the price of replacement. Secondly is the short downtime. The process takes as little as 1-3 hours to complete and you can have your bathtub ready for use the next morning. Thirdly, and just as important, is there is NO MESS. We come in and do the job, and leave your bathroom just as clean as it was when we started. The only aftereffect is a like-new looking bathtub. Finally, there is no need to disturb any of the plumbing, or surrounding areas. as this work is ALL COMPLETELY done in its place.”

Why refinish your old bath room?

To save money`

If you don't want to spend lots of money for remodeling your bathroom, then refinishing is the best way to give it a new look at affordable budget. Replacing the bathtub alone can cost you around $3500.

For refinishing process, you have to pay only a small fraction of the cost of replacement and without any mess and hassle replacing it.

To Save Time

Refinishing a bath tub takes only 2-3 hours. You can use the bathroom the very next day. Replacing a tub can take weeks, when you factor in the time to rip out your old tub, install a new one, let caulking dry, and readjust or replace plumbing. With many homes having only one bathtub, weeks of delay are not convenient.

Durability

Refinished tubs or ceramic tiles can easily last up to 4-5 years with proper maintenance. A new porcelain bathtub may last a few years longer, but the cost of replacement is nearly triple what it would cost to refinish. Not only is refinishing more cost-effective, but refinishers are also able to provide extras, such as slip-resistant surfaces and custom colors.

Refinishing is a great process if it is done with the right materials and techniques, but all refinishing is not the same so ask questions to the refinishing service professionals before you hire them. Ask how long the company has been in business and ask for references.

Re-glazing, Resurfacing, Refinishing-Best bathroom remodeling methods

The bathtub can wear out and become discolored overtime. The other parts of bathroom like sinks, tiles may have discoloration issues such as that of bathtubs. Bathroom refinishing is the best way to make your bathroom look like a new one!

When it comes to remodeling your bathroom to give it a fresh look, re-glazing, resurfacing and refinishing are highly efficient methods saving you time and money. Also these methods are environmental friendly methods reducing transportation, disposal of old bathtub if replace you want to replace it, and is a method of re-using the same thing by improving it. These methods remodeling your bathroom can also be used to improve your bathroom tiles and sinks.

Another good thing about these methods is that your choice of getting your bathroom a new color is not restricted. Tub refinishing or tub re-glazing also gives you the choice of choosing the new color of the fixtures.

About the process

Resurfacing, re-glazing, and refinishing are all interchangeable terms for the same process. This process is where a chemical coating, most commonly epoxy, is applied over the existing finish of a fixture. Most commonly this is applied to bathtubs, tiles, sinks, and in some cases, floors. The process includes stripping, if needed as in the case of previously resurfaced (or painted in ANY WAY) fixtures, acid washing, sanding, and then masking the surrounding area, at which point we can apply a primer, and 4 coats of the high gloss, sprayed on epoxy finish. After drying to the touch, unmasking and caulking of any applicable edges.

Resurfacing tiles, each job must be evaluated individually, but the average sized bathroom (approx. 100 sq. ft. of tile) with a bathtub can be completed in as little as one day. Resurfacing in a variety of colors based upon several of the major paint, or bath fixture manufacturers color charts, in some cases and matching an existing color provided can also be done. This process can be applied to fiberglass, plastic, porcelain, and previously resurfaced bathtubs. This process can be guaranteed for up to 5 years against peeling, cracking, crazing, or any workmanship defects. With proper care and maintenance your fixture can last 6-10 years or longer. Proper care includes using only non-abrasive cleaners, you may not use automatic shower cleaners, and should you find the need for using a matt for showering, you need to let the material cure for approximately 2 weeks and you must remove it after each use.

Bathtub Repair NY

Perma Ceram of Westchester¹, Cortlandt Manor, NY offers the entire bathtub refinishing services in Westchester at a fraction of the cost of other alternatives, and in little as one day without any mess. They also provide services like tile repairing, tile regrouting and tile resurfacing.

Tuesday, November 19, 2013

Things to follow when considering resurfacing your bathtub

If you have an old bathtub that looks ugly, you should try bathtub resurfacing. This is the best alternative to buying a new bath and paying for its installation. Resurfacing is a technique, which was developed due to the high cost, and inconvenience of replacing a bathtub.

Bath tub resurfacing is process that makes your old bathtub look like new one. There are several advantages of resurfacing, of which the biggest is the cost. Save thousands of dollars as opposed to the price of replacement. Secondly is the short downtime. The process takes about 3-4 hours and you are left without any mess in the bathroom. The bathtub can be used the very next day itself.

But while considering resurfacing your bathtub you should avoid certain things that may be costly mistakes.

The things to know when considering resurfacing your bathtub

1. Do not try it yourself though you have the option to do it yourself. It is better to hire professional bath tub resurface еxреrtѕ to get the job done. This is because reading the manual and doing the job yourself may end up with poor quality of work and damages your bath tub. It is better to leave the job for experts to save your time and money.

2. Check out whether the service provider you are hiring is providing any guaranty on the work they do. Some of them provide money back guarantee on their work.

3. Dеtеrmіnе thе сrеdеntіаlѕ thаt thе рrоfеѕѕіоnаlѕ hold. Try to find out ѕоmеbоdу in your locality that саn be trusted to do your job.

4. Check out thе type of рrоduсtѕ they use to do the job. Check out whether the products they use are certified and branded. Otherwise they may cause hazardous skin infections.

5. Establish a contract with the service provider. Make sure that the professionals you are hiring deliver thе bеѕt роѕѕіblе rеѕultѕ to уоu.

Bathtub refinishing services in Westchester NY

Perma Ceram¹ of Westchester, Cortlandt Manor, NY offers the entire bathtub refinishing services in Westchester at a fraction of the cost of other alternatives, and in little as one day without any mess. They also provide services like tile repairing, tile regrouting and tile resurfacing. above things into consideration before planning to resurface your bathroom.

Things to follow when considering resurfacing your bathtub

But while considering resurfacing your bathtub you should avoid certain things that may be costly mistakes.

The things to know when considering resurfacing your bathtub

2. Check out whether the service provider you are hiring is providing any guaranty on the work they do. Some of them provide money back guarantee on their work.

3. Dеtеrmіnе thе сrеdеntіаlѕ thаt thе рrоfеѕѕіоnаlѕ hold. Try to find out ѕоmеbоdу in your locality that саn be trusted to do your job.

4. Check out thе type of рrоduсtѕ they use to do the job. Check out whether the products they use are certified and branded. Otherwise they may cause hazardous skin infections.

5. Establish a contract with the service provider. Make sure that the professionals you are hiring deliver thе bеѕt роѕѕіblе rеѕultѕ to уоu.

Bathtub refinishing services in Westchester NY

Things to follow when considering resurfacing your bathtub

But while considering resurfacing your bathtub you should avoid certain things that may be costly mistakes.

The things to know when considering resurfacing your bathtub

2. Check out whether the service provider you are hiring is providing any guaranty on the work they do. Some of them provide money back guarantee on their work.

3. Dеtеrmіnе thе сrеdеntіаlѕ thаt thе рrоfеѕѕіоnаlѕ hold. Try to find out ѕоmеbоdу in your locality that саn be trusted to do your job.

4. Check out thе type of рrоduсtѕ they use to do the job. Check out whether the products they use are certified and branded. Otherwise they may cause hazardous skin infections.

5. Establish a contract with the service provider. Make sure that the professionals you are hiring deliver thе bеѕt роѕѕіblе rеѕultѕ to уоu.

Bathtub refinishing services in Westchester NY

Monday, November 11, 2013

Tile Re-grouting Process

Nothing shows the age of a home more than discolored, neglected grout. Tile re-grouting is the process used to make your bathroom or kitchen look like a brand new one.

Old tiles often have cracked and discolored grout. You can see this problem commonly in tiled surfaces of bathroom, especially in the shower area. You should not ignore this cracked and damaged grout.

Process of tile re grouting

1. Clean the existing grout properly

Before starting the process of tile regrouting, all the existing grout should be cleaned properly. After cleaning the damaged grout, if the tiles look fine then the entire regrouting process can be skipped until the same is much damaged. Use best grout cleaners to clean the grout, so that no remaining is left behind.

2. Prepare the surface

Prepare the surface to start tile regrouting. Vacuum the area and make sure that no chunks of grout are left behind.

3. Choose the appropriate grout color

Choose grout of desired color that matches your tiles. Grout is available in dry or pre-mixed form. With help of a grout float make the grout mixture ready for application. A grout float helps you spread grout evenly on the entire tiled area. Grout float ensures that no crack or gaps are left while applying grout between tiles.

4. Apply the grout between the gaps:

Spread the grout over the tile using the tool at an angle of 30 degrees to the surface. Press the grout properly inside the cracks and gaps. Leave it for about 20 minutes.

5. Clean the Surface

Clean the re grouted area with a wet sponge to remove any remaining left behind. Once this is done leave the grout to dry for about 20 minutes.

Tile Regrouting services in Westchester

Perma Ceram¹ of Westchester, NY offers tile regrouting services at very affordable prices. They will come, dig out the existing grout, and replace it with new fresh fortified grout of your color choice, and buff it down. They also provide services like tile repairing and tile resurfacing. You can call them at (914) 930-4964 or (888) 797-8108 if you need any services.

Friday, November 8, 2013

How to Re-Grout Your Tile

Re Grouting is a smart way to save your money. If you don’t take proper care of your tiles, you may end up with a huge damage. The process of re-grouting can be completed in a small amount of time. This work can potentially save you thousands in repairs, and gives a fresh new look to almost any bathroom. The author in this article explains about the re-grouting process.

Re Grouting is a smart way to save your money. If you don’t take proper care of your tiles, you may end up with a huge damage.

A senior executive from Perma Ceram¹ of Westchester says about tile re-grouting, “Nothing shows the age of a home more than discolored, neglected grout. Tile grout is the material which is used to seal the gaps between your wall tile, and this is one of the most neglected areas of the bathroom, particularly in shower areas. Over time, the grout will get moldy, yellowed, discolored, or begin to come out. This is an indication of the grout needing to be replaced. Over time your grout will get porous and eventually water will penetrate the grout and seep into the wall causing a potentially dangerous situation. If left for a long enough period of time, this water seepage can attract insects and eventually catastrophic wall damage causing your tile to fall or even worse.” (Ref: Perma Ceram of Westchester, http://permaceramwestchester.com/services/re_grouting)

The process of re-grouting can be completed in a small amount of time. This work can potentially save you thousands in repairs, and gives a fresh new look to almost any bathroom.

The processes of Re-Grouting are as follows:

Step1: Decide what type of grout you will be using - sanded or non-sanded. This depends on the size of your grout's joint. If your grout joints are larger than 1/8 inch (.3175 cm) use sanded grout to fill in the space; if your joints are less than 1/8 inch (.3175 cm) use non sanded grout to fill in your joints as it is more compact.

Step 2: Clean the space really well and remove existing grout. This will prevent mold contamination.

Step 3: Apply a tile sealant over the surface of your tiles if they have become porous so the grout does not sink underneath the surface when regrouting your tile. You can do this by using a tile sponge, a roller, or simply wipe the tiles with a coat of sealant and allow to dry for 24 hours.

Step 4: Mix up your grout as the manufacturer recommends. Apply a generous amount of grout to your grout joints with a grout trowel using circular motions. Be sure to distribute extra grout into the grout joints in order to fill them completely. Grout all areas of your tile floor except the expansion joints; these are the areas between the floor tile and bathtub, wall, door, and cabinet or sink area. Let grout set for approximately 10 minutes. While the grout is setting, fill your second 5 gallon (19 L) bucket with water and grab your tile sponge in order to clean the tile floor.

Step 5: Then, using a very small amount of water and a sponge, keep cleaning off the surface of the tiles you've regrouted. Wipe all grout residues off of the tile using the damp tile sponge in a diagonal motion. Rinse and repeat. Rinse tile sponge and repeat the previous step until the entire grout residue is removed and tile is completely clean of grout haze.

Step 6: Allow grout to cure for 24 to 48 hours before stepping on it to ensure its stability and that it is completely dry. Caulk the expansion joints using a caulk color that matches your grout. Completely fill these expansion joints then smooth and concave using your finger.

Step 7: Once the grout has completely cured, apply a penetrating sealer using either a sponge or spray bottle to the grout joints. Wipe off excess sealer from the tile immediately as it will stain the tile.

Friday, October 18, 2013

Bathroom Tiles Resurfacing

Ceramic shower tiles may be damaged or broken over a period of years. This may include damage to the grout joints, or even individual tiles may crack, causing water to leak into the walls or floor space. The article gives idea about how professionals repair them to produce long lasting results.

If your ceramic tiles have some missing pieces you should replace them. When the tiles are chipped, you should get them repaired. Repairing or replacing the tile in bathrooms is complex. Hiring an expert to repair bathroom tile is good idea and also work done by expert’s produces long lasting results.

Assess the damage

The experts first assesses the damage. If there are only a few cracked, loose or missing pieces of tiles, a simple replacement job will sufficient. If the damage is minimal, painting the cracks in the tile with matching paint will be simpler than replacing the tiles. If the damage is too large to conceal with paint then the bathroom tiles will need to be replaced.

Tile repair process

For cracked tiles:

First tiles are cleaned using a household cleanser. Special ceramic glue is placed onto the cracked areas. The glue is left to dry for about 24 hours.
Using sandpaper, the dried glue is sanded until a completely flat area is obtained. In the end the dust is wiped out. The tiles should be totally clean before painting.

Later paint is placed over the damaged tile. The paint should dry for a day. The next step is to apply polyurethane as soon as the paint is dry. The polyurethane should dry for at least 8 hours.

Again sandpaper is applied for the dry polyurethane. Two more layers of polyurethane is applied. You must avoid walking on the tile for 24 hours.

Replacing the Damaged Tiles

The big job is getting the ceramic off the wall. Professional use grout saw to cut out the grout. Then, with a hammer and a chisel, the tiles are softly separated from the wall. Once that's done, the wall is sanded until smooth. Then the tile is set up using grout.

All this work is to be done by the professional for safety and long lasting results.

Bathtubs & Tile Resurfacing NY

Bathtub refinishing done by professional produce long lasting results

If you've made the decision to update your bathroom, and have chosen bathtub resurfacing over replacement, you are now left with two options: hire a professional, or, attempt to take on task yourself. But for this type of job, many benefits will come with hiring a professional who is experienced in bathtub refinishing.

Benefits of hiring a professional for your bathtub & tile resurface

1. Although there is no or plumbing involved, there are strong chemicals used to strip the tub. This can create mess, and release many dangerous fumes. Professionals trained in bathtub and tile resurfacing is equipped to handle necessary ventilation process and have tools to help with quick drying of the chemicals.

2. A good bathtub refinishing contractor will take the time to properly prepare your bathtub's surface based on years of experience in what works best depending on the material that your bathtub is made of.

3. Contractors have access to certain products that are not necessarily available for those who do repairs individually.

4. Professionals will be able to have a variety of colors to choose from to match your current color.

5. Hiring a contractor will ensure that the best way of restoring the natural beauty of your bathtub is used. A professional bath resurfacing company will usually stand behind their products 100%, so they want to give you best, long-lasting results that they can.

6. Doing this yourself can take 5-8 days, and if you end up with poor results, you have to hire a professional again.
7. A professional bath resurfacing company will usually stand behind their products 100%, so they want to give you best, long-lasting results that they can.

Bathtub Repair NY

Why Bathtub and Tile Resurfacing?

Why someone would choose bathtub and tile resurfacing over other methods of improving their bathroom. The answer is, if you’re looking to update your bathroom you really have only three options; you can completely tear out and replace that which you currently have, you can cover your fixtures up with a liner, or you can simply refinish your bathroom in a way that is attractive, inexpensive, and low maintenance.

How Does Bathtub And Tile Resurfacing Look?

When bathtub and tile resurfacing are completed by a trained technician, imperfections in your bathtub or tile, such as chips or scratches, will be fixed during the refinishing process. With the extensive variety of colors that are available, you can find a match to any décor you already have in place, thus breathing new life into your bathtub or tile.

How Long Does It Take To Complete a Bathtub And Tile Resurfacing?

It takes a technician about six to eight hours to complete your bathtub and tile reglazing project. If your technician is using high quality products, the finish should be dry to the touch in approximately 2 – 4 hours, though you shouldn’t use your bathtub for at least 24 hours after the application. Compare this to the time, and multiple appointments, it can take to completely tear out and replace or reline your bathtub and tile, and you’ll see that reglazing may be the best option for you.

Refinishing functionally sound bathtubs and tile can save you thousands compared to the cost of replacing or lining them. Furthermore, refinished bathtubs and tile have a durable finish that, if appropriately maintained, can last over 10 years and if completed by a reputable company, should come with a warranty that backs up the quality of service being promised.
As one can see, there are several advantages to reglazing your bathtub or tile over completely replacing or relining them. Call your reputable refinishing company to find out more today.

Bathtubs & Tile Resurfacing NY

Perma Ceram¹ of Westchester, Cortlandt Manor, NY is a bathtub refinishing company which offers the entire bathtub refinishing services at a fraction of the cost of other alternatives, and in little as one day without any mess. They also offer services like: Re-grouting, Re-Tiling, and Tile Repairs, Fiberglass and Porcelain Chip Repairs etc. For more details visit: http://www.permaceramwestchester.com/

1. Perma Ceram: Perma Ceram of Westchester, Cortlandt Manor, NY is serving Westchester since 1978. They provide refinishing services as well as regrouting and tile repairs. Call at (914) 930-4964 or (888) 797-8108 or you can send mails at info@permaceramwestchester.com. Office is located at 72 Gallows Hill Road, Cortlandt Manor, NY 10567. For more information, visit website www.permaceramwestchester.com

Thursday, October 17, 2013

How Bath tub refinishing is better than replacing it with new one

Bathtub refinishing helps many homeowners save money over bathtub replacement. When bathtubs looks like outdated, scratched or chipped, the homeowners try to throw it away and get new ones in. But bath tub refinishing saves you up to 80% of the cost of bathtub replacement. So now a day s many home owners are interested in Bath tub refinishing.

How can one save such a huge amount of money by refinishing their bathtub instead of replacing it?

Bath tubs prices are almost equal to the costs charged by professional bath tub refinishing services, but labor drives up the cost of bathtub replacement. The old tub has to be removed. All the mess from fixtures has to be removed of. Landfill fees, plumbing, electrical, and tile replacement price etc. costs you much more than the original cost of the bathtub.

Bathtub refinishing also saves you time

It takes about 4 to 6 hours to refinish a tub and all work is done in the bathroom. Because of all the different sub-contractors with specialized skills involved in bathtub replacement, it takes days or even weeks to get a bathtub replaced. Bath tub refinishing saves you time and your bath tub is ready to use by the very next day itself.

Bathtub refinishing is better than bathtub replacement because it is eco-friendly. It takes a lot of energy and other assets to manufacture a new tub. It also takes energy to transport the new tub from the manufacturing facility, to the warehouse, store and finally to the homeowner. Such wasted resources are saved when tubs are refinished instead of being replaced. Another environmental benefit of re-glazing over replacement is that, since the old tub is refinished in the bathroom, it does not need landfills.

Other Bathroom remodeling services include: Resurface or recolor showers, tiles resurfacing fiber glass repair, repair of chips, cracks and small holes etc.

By saving money, time and the environment, many homeowners are showing interest in bath tub resurfacing to make their bath tub look like a new one.

Bathtubs & tile resurfacing Westchester

Tuesday, October 8, 2013

Bath Tub Refinishing Process

Is your bathtub or shower worn out and looking ugly? Then it is time to resurface the tub, tiles and countertop in your bathroom.

Bathtub resurfacing is a process where the existing bathtub is brought back to a like new condition with limited the use of solvents with a harsh odor. This process is guaranteed against peeling, cracking, and chipping for up to 5 years.

Bathtub refinishing process

Step 1: Clean the tub with the heavy duty scrub pad and a unique blend of mild acids that will remove virtually everything on the tub yet will not harm the surface.

Step 2: Repair any chips or scratches on the tubs surface with our fast hardening permanent chip filler.

Step 3: Applying Slip-GripTMor a vinyl safety mat to the bottom of the tub for safety and to cover any and all imperfections in the tub bottom.

Step 4: Restore the tubs surface by applying our unique clear, liquid sealer to all dull areas of the tub. This will fill all minor imperfections. After this step is completely dry apply gloss coat right over the restored areas. This will restore these areas to a glossy look like the rest of the tub. Now that the tub is uniformly glossy its back to its original look!

Step 5: Recaulk surrounding areas of the bathtub

How to care for your refinished surfaces

It is recommended to use cleaning products developed especially for tubs and tiles. Avoid cleaners that contain bleach, citrus or any type of abrasives. Citrus products and industrial strength cleaners contain acids that can spoil your refinishing over time, and bleach can cause discoloration. Use a sponge or soft cloth when wiping the refinished bathtub or tile surface.